1. Home
  2. Honda R&D Technical Review Vol.23 N...
  3. Development of CAE Standardization ...

Technical Review e-Book: Summary

Development of CAE Standardization System for Motorcycle Parts with Navigating Function for Designers

Article of Honda R&D Technical Review Vol.23 No.2


"Motorcycle parts CAE standardization system" that focused on CAE for designers (hereafter termed "designers' CAE") has been developed. This system simplified the analytical condition settings by unique navigation function that was suitable for designers' CAE, and realized prevention of redoing due to misunderstandings and operation errors. And also, the individual differences in analyses were eliminated by standardizing the methods for analysis and condition settings. In addition, the comparison of the analytical results was facilitated by the data accumulation using this system, and evaluations of the results and the fixed form report making were semi-automatically carried out by the function of "Analysis Tag." Thus this system reduced the working hours of designers' CAE by 75%, and enabled effective supports for design operations.


(1) Kojima, Y.: First Order Analysis as CAE for Design Engineers, R&D Review of Toyota CRDL, Vol. 37, No. 1, p. 1-3 (2002)
(2) Umemura, K., Kondo, T.: Development and Deployment of SOL!BOX, Denso Technical Review, Vol. 7, No. 1, p. 136-140 (2002)
(3) Dassault Systemes, http://www.3ds.com/
(4) Uchida, T., Nagai, S., Koyama, S.: Practical Example and Future Directions for CAE-Based Development for Automobile Transmission by Designers, Honda R&D Technical Review, Vol. 15, No. 1, p. 109-114

Author (organization or company)

Mijo ITO(Motorcycle R&D Center)、Daisuke ISHIHARA(Motorcycle R&D Center)、Miki TSUCHIYA(Motorcycle R&D Center)、Masato OTSUKA(Motorcycle R&D Center)、Kenji TSUCHIMOTO(Motorcycle R&D Center)、Yasuhiro MIYAZAKI(Motorcycle R&D Center)

We would like to get your opinion on this research paper. (This is only applicable to registered members.)

The readers of this research paper have also selected these research papers.

Proposal of Development Process Using DSM and Simulation
Article of Honda R&D Technical Review Vol.29 No.1
Establishment of Analysis Method for Weight Reduction Design of Motorcycle Frame Parts
Article of Honda R&D Technical Review Vol.18 No.2
Practical Examples and Future Directions for CAE-Based Development for Automobile Transmissions by Designers
Article of Honda R&D Technical Review Vol.15 No.1